Professional trigger system for the installation into acoustic drums (conversion to electronic drums)
Dual Trigger (2 playing areas = head / rim)
Positional sensing compatible (corresponding module required)
Excellent triggering with sensitive rim detection around the entire hoop.
Very easy to install by using two opposing lugs. No drilling required!
Our crossbar trigger system is continuously adjustable to the inside diameter of the drum shell and is form-fitting
Length of the long holes for mounting the system to the lugs: 94 mm
Height adjustable to optimize the coupling of the trigger cone onto the mesh head
Fits into almost any drum with suitable diameter and an even number of lugs per side mounted with M4 screws
M4 mounting screws, washers and lock washers
The terms M4 and M5 refer to the diameter of the threads of the screws that attach the lugs to the drum shell. M
M4 = diameter of 4 mm
To determine if you need the M4 or M5 version, you can measure the diameter of one of the attachment screws of the tuning lugs with a sliding caliper.
Not suitable for steel shells in its standard version because steel shells have a smaller wall thickness than wood shells and the mounting thread of the lugs usually protrude through the wall of the drum shell. For drum shells made of metal the spacer kit is required!
If a reinforcing fin of a metal shell or a reinforcing ring of a wooden shell projects inward the drum shell, our trigger systems may not fit without the additional spacer kit or a customization. Please ask us for a solution if your drum shells are designed that way.
>> Hand-crafted in Germany <<
This item is produced to order. The production time to dispatch depends on the current order situation and is between 4 and 6 weeks.