Aluminium sections & mounting angles

    Aluminum sections for DIY drum trigger systems.         Dimensions:   (height / width / thickness)   23,5 x 43,5 x 1,5 mm   700 mm long   ... (mehr lesen)

    Aluminum section for DIY drum trigger systems.       Dimensions:   (height / width / thickness)   19,5 x 35,5 x 1,5 mm   Suited for decoupler 33x41x25 mm ... (mehr lesen)

    With plug mandrel and two opposite mounting holes   Includes mounting screws, screw nuts and discs     With: 60 mm   Length: 105 mm   Hole spacing: 76 mm   ... (mehr lesen)

    Mounting angle with slotted hole 30 mm x 18,2 mm x 17,5 mm slotted hole: 20,5 mm / for M4 screws mounting hole: 5,2 mm / for M5 screws   galvanized       ... (mehr lesen)

    Mounting angle with slotted holes   Approximately 90 mm x 50 mm x 19 mm Slot (long): approx 59.5 mm x 6.5 mm Slot (short): approx 29.5 mm x 6.5 mm Material thickness: 2 mm ... (mehr lesen)

    Mounting angle with slotted hole   Approximately 79 mm x 65 mm x 20 mm Slot: approx 5.0 mm x 50 mm Holes: 6.0 mm Material thickness: 2.5 mm Galvanized steel   ... (mehr lesen)