RTS-BD bass drum trigger system (M4)

 

High professional bass drum trigger system for the installation into an acoustic drum (conversion into electronic drum)

 


Our RTS bass-drum-trigger system can be used with almost any drum shell. Thanks to its integrated head dampers our RTS bass drum trigger system offers a realistic feel with minimum rebound and best trigger results.

Additional drillings are not required, because the bass drum trigger system will be fixed by the lugs.

The trigger system will be delivered fully assembled and can be installed easily. Technical knowledge is not required, you only need to deal with screwdriver and spanner. It does not have to be soldered, because the trigger system is already equipped with a lockable 6,3 mm jack (by Neutrik). Simply install the bass drum trigger system into the drum shell and it's done.

If necessary a bass drum which is equipped with this trigger system can always be builded back to it's original acoustic state.

Available for shell diameters from 18" to 22" with 6, 8 or 10 lugs.

 

 

Hints:

 

The terms M4 and M5 refer to the diameter of the threads of the screws that attach the lugs to the drum shell. M means metric.

M5 = diameter of 5 mm

 

To determine if you need the M4 or M5 version, you can measure the diameter of one of the attachment screws of the tuning lugs with a sliding caliper.


If a reinforcing fin of a metal shell or a reinforcing ring of a wooden shell projects inward the drum shell, our trigger systems may not fit without a customization. Please ask us for a solution if your drum shells are designed that way.

 

 

 

... Compatible with all drum modules and manufacturers !!!


After purchase, we need the following data:

1. Distance between the two threaded holes of one of the tuning lugs (from hole center to hole center)

2. Distance between the bearing edge and one of the first holes of the tuning lugs inside the shell (from top of the bearing edge to hole center)

This data are required so that everything fits well and nothing is left to chance, because some drums drop out of the norm.


>> Handcrafted in Germany <<


This item is produced to order. The production time to dispatch depends on the current order situation and is between 4 and 6 weeks.

 

 

Manual (German)

 

 

Optional accessories:

 

 

Air vent connector Version 2

 

 

 

Variants:

for installation into acoustic drums (conversion to E-Drum)

850,00 €

  • derzeit leider ausverkauft / currently sold out